aboutsummaryrefslogtreecommitdiff
path: root/e2fslib/dosio.h
diff options
context:
space:
mode:
Diffstat (limited to 'e2fslib/dosio.h')
-rw-r--r--e2fslib/dosio.h153
1 files changed, 0 insertions, 153 deletions
diff --git a/e2fslib/dosio.h b/e2fslib/dosio.h
deleted file mode 100644
index a0d652d..0000000
--- a/e2fslib/dosio.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * v1.0
- *
- * Disk I/O include file for the ext2fs/DOS library.
- *
- * Copyright (c) 1997 Mark Habersack
- * This file may be distributed under the terms of the GNU Public License.
- *
- */
-#ifndef __diskio_h
-#define __diskio_h
-#ifdef __TURBOC__
-#ifndef __LARGE__
-# error "ext2fs/DOS library requires LARGE model!"
-#endif
-#endif
-
-#ifdef __TURBOC__
-#include "msdos.h"
-#endif
-
-/*
- * A helper structure used in LBA => CHS conversion
- */
-typedef struct
-{
- unsigned short cyl; /* Cylinder (or track) */
- unsigned short head;
- unsigned short sector;
- unsigned short offset; /* Offset of byte within the sector */
-} CHS;
-
-/*
- * All partition data we need is here
- */
-typedef struct
-{
- char *dev; /* _Linux_ device name (like "/dev/hda1") */
- unsigned char phys; /* Physical DOS drive number */
- unsigned long start; /* LBA address of partition start */
- unsigned long len; /* length of partition in sectors */
- unsigned char pno; /* Partition number (read from *dev) */
-
- /* This partition's drive geometry */
- unsigned short cyls;
- unsigned short heads;
- unsigned short sects;
-} PARTITION;
-
-/*
- * PC partition table entry format
- */
-#ifdef __DJGPP__
-#pragma pack(1)
-#endif
-typedef struct
-{
- unsigned char active;
- unsigned char start_head;
- unsigned char start_sec;
- unsigned char start_cyl;
- unsigned char type;
- unsigned char end_head;
- unsigned char end_sec;
- unsigned char end_cyl;
- unsigned long first_sec_rel;
- unsigned long size;
-} PTABLE_ENTRY;
-#ifdef __DJGPP__
-#pragma pack()
-#endif
-
-/*
- * INT 0x13 operation codes
- */
-#define DISK_READ 0x02
-#define DISK_WRITE 0x03
-#define DISK_GET_GEOMETRY 0x08
-#define DISK_READY 0x10
-
-/*
- * Errors to put in _dio_error
- */
-#define ERR_BADDEV 0x00000001L
-#define ERR_HARDWARE 0x00000002L
-#define ERR_NOTSUPP 0x00000003L
-#define ERR_NOTEXT2FS 0x00000004L
-#define ERR_EMPTYPART 0x00000005L
-#define ERR_LINUXSWAP 0x00000006L
-
-/*
- * Functions in diskio.c
- */
-
-/*
- * Variable contains last module's error
- */
-extern unsigned long _dio_error;
-
-/*
- * This one contains last hardware error (if _dio_error == ERR_HARDWARE)
- */
-extern unsigned long _dio_hw_error;
-
-/*
- * Macros to check for disk hardware errors
- */
-#define HW_OK() ((unsigned char)_dio_hw_error == 0x00)
-#define HW_BAD_CMD() ((unsigned char)_dio_hw_error == 0x01)
-#define HW_NO_ADDR_MARK() ((unsigned char)_dio_hw_error == 0x02)
-#define HW_WRITE_PROT() ((unsigned char)_dio_hw_error == 0x03)
-#define HW_NO_SECTOR() ((unsigned char)_dio_hw_error == 0x04)
-#define HW_RESET_FAIL() ((unsigned char)_dio_hw_error == 0x05)
-#define HW_DISK_CHANGED() ((unsigned char)_dio_hw_error == 0x06)
-#define HW_DRIVE_FAIL() ((unsigned char)_dio_hw_error == 0x07)
-#define HW_DMA_OVERRUN() ((unsigned char)_dio_hw_error == 0x08)
-#define HW_DMA_BOUNDARY() ((unsigned char)_dio_hw_error == 0x09)
-#define HW_BAD_SECTOR() ((unsigned char)_dio_hw_error == 0x0A)
-#define HW_BAD_TRACK() ((unsigned char)_dio_hw_error == 0x0B)
-#define HW_UNSUPP_TRACK() ((unsigned char)_dio_hw_error == 0x0C)
-#define HW_BAD_CRC_ECC() ((unsigned char)_dio_hw_error == 0x10)
-#define HW_CRC_ECC_CORR() ((unsigned char)_dio_hw_error == 0x11)
-#define HW_CONTR_FAIL() ((unsigned char)_dio_hw_error == 0x20)
-#define HW_SEEK_FAIL() ((unsigned char)_dio_hw_error == 0x40)
-#define HW_ATTACH_FAIL() ((unsigned char)_dio_hw_error == 0x80)
-#define HW_DRIVE_NREADY() ((unsigned char)_dio_hw_error == 0xAA)
-#define HW_UNDEF_ERROR() ((unsigned char)_dio_hw_error == 0xBB)
-#define HW_WRITE_FAULT() ((unsigned char)_dio_hw_error == 0xCC)
-#define HW_STATUS_ERROR() ((unsigned char)_dio_hw_error == 0xE0)
-#define HW_SENSE_FAIL() ((unsigned char)_dio_hw_error == 0xFF)
-
-
-/*
- * Open the specified partition.
- * String 'dev' must have a format:
- *
- * /dev/{sd|hd|fd}[X]
- *
- * where,
- *
- * only one of the option in curly braces can be used and X is an optional
- * partition number for the given device. If X is not specified, function
- * scans the drive's partition table in search for the first Linux ext2fs
- * partition (signature 0x83). Along the way it dives into every extended
- * partition encountered.
- * Scan ends if either (a) there are no more used partition entries, or
- * (b) there is no Xth partition.
- *
- * Routine returns 0 on success and !=0 otherwise.
- */
-int open_partition(char *dev);
-
-#endif /* __diskio_h */