diff options
Diffstat (limited to 'introspection/org.freedesktop.ModemManager.Modem.xml')
| -rw-r--r-- | introspection/org.freedesktop.ModemManager.Modem.xml | 245 |
1 files changed, 0 insertions, 245 deletions
diff --git a/introspection/org.freedesktop.ModemManager.Modem.xml b/introspection/org.freedesktop.ModemManager.Modem.xml deleted file mode 100644 index 3f6f0bb..0000000 --- a/introspection/org.freedesktop.ModemManager.Modem.xml +++ /dev/null @@ -1,245 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> - -<node name="/" xmlns:tp="http://telepathy.freedesktop.org/wiki/DbusSpec#extensions-v0"> - - <interface name="org.freedesktop.ModemManager.Modem"> - <method name="Enable"> - <tp:docstring> - Enable the device. Initializes the modem. - </tp:docstring> - <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> - <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_enable"/> - <arg name="enable" type="b" direction="in"> - <tp:docstring> - True to enable the device, False to disable. - </tp:docstring> - </arg> - </method> - - <method name="Connect"> - <tp:docstring> - Dial in. - </tp:docstring> - <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> - <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_connect"/> - <arg name="number" type="s" direction="in"> - <tp:docstring> - The number to use for dialing. - </tp:docstring> - </arg> - </method> - - <method name="Disconnect"> - <tp:docstring> - Disconnect modem. - </tp:docstring> - <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> - <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_disconnect"/> - </method> - - <method name="GetIP4Config"> - <tp:docstring> - Request the IP4 configuration from the device. - Note that it'll only be supported for IPMethod MM_MODEM_IP_METHOD_STATIC. - </tp:docstring> - <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> - <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_get_ip4_config"/> - <arg name="address" type="(uuuu)" direction="out"> - Structure containing IP4 address, DNS1, DNS2, DNS3. - The DNS list is padded with 0's if there's less than 3 DNS servers. - </arg> - </method> - - <method name="GetInfo"> - <tp:docstring> - Get the card information (manufacturer, modem, version). - </tp:docstring> - <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> - <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_get_info"/> - <arg name="info" type="(sss)" direction="out"> - <tp:docstring> - Structure containing manufacturer, model, and version (revision) of the card. - </tp:docstring> - </arg> - </method> - - <method name="Reset"> - <tp:docstring> - Clear non-persistent configuration and state, and return the device to - a newly-powered-on state. This command may power-cycle the device. - </tp:docstring> - <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> - <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_reset"/> - </method> - - <method name="FactoryReset"> - <tp:docstring> - Clear the modem's configuration (including persistent configuration and - state), and return the device to a factory-default state. This command - may or may not power-cycle the device. - </tp:docstring> - <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> - <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_factory_reset"/> - <arg name="code" type="s" direction="in"> - Carrier-supplied code required to reset the modem. Ignored if not required. - </arg> - </method> - - <signal name="StateChanged"> - <tp:docstring> - The modem's state (see the State property) changed. - </tp:docstring> - <arg name="old" type="u"> - <tp:docstring> - Old state. - </tp:docstring> - </arg> - <arg name="new" type="u"> - <tp:docstring> - New state. - </tp:docstring> - </arg> - <arg name="reason" type="u" tp:type="MM_MODEM_STATE_CHANGED_REASON"> - <tp:docstring> - Reason for this state change. - </tp:docstring> - </arg> - </signal> - - <property name="Device" type="s" access="read"> - <tp:docstring> - The modem port to use for IP configuration and traffic. - </tp:docstring> - </property> - - <property name="DeviceIdentifier" type="s" access="read"> - <tp:docstring> - A best-effort device identifier based on various device information like - model name, firmware revision, USB/PCI/PCMCIA IDs, and other properties. - This ID is not guaranteed to be unique and may be shared between - identical devices with the same firmware, but is intended to be - "unique enough" for use as a casual device identifier for various - user experience operations. This is not the device's IMEI or ESN since - those may not be available before unlocking the device via a PIN. - </tp:docstring> - </property> - - <property name="MasterDevice" type="s" access="read"> - <tp:docstring> - The physical modem device reference (ie, USB, PCI, PCMCIA device), which - may be dependent upon the operating system. In Linux for example, this - points to a sysfs path of the usb_device object. - </tp:docstring> - </property> - - <property name="Driver" type="s" access="read"> - <tp:docstring> - The driver handling the device. - </tp:docstring> - </property> - - <property name="Type" type="u" access="read" tp:type="MM_MODEM_TYPE"> - <tp:docstring> - The modem type. - </tp:docstring> - </property> - - <property name="Enabled" type="b" access="read"> - <tp:docstring> - TRUE if the modem is enabled (ie, powered and usable), FALSE if it is disabled. - </tp:docstring> - </property> - - <property name="EquipmentIdentifier" type="s" access="read"> - <tp:docstring> - The identity of the device. This will be the IMEI number for - GSM devices and the hex-format ESN/MEID for CDMA devices. - </tp:docstring> - </property> - - <property name="UnlockRequired" type="s" access="read"> - <tp:docstring> - Empty if the device is usable without an unlock code or has already - been unlocked. If the device needs to be unlocked before becoming usable this - property contains the specific unlock code required. Valid unlock code values - are "" (blank), "sim-pin", "sim-puk", "ph-sim-pin", "ph-fsim-pin", - "ph-fsim-puk", "sim-pin2", "sim-puk2", "ph-net-pin", "ph-net-puk", - "ph-netsub-pin", "ph-netsub-puk", "ph-sp-pin", "ph-sp-puk", "ph-corp-pin", and - "ph-corp-puk". - </tp:docstring> - </property> - - <property name="UnlockRetries" type="u" access="read"> - <tp:docstring> - The number of unlock retries remaining for the unlock code given by the property UnlockRequired, or 999 if - the device does not support reporting unlock retries. - </tp:docstring> - </property> - - <property name="IpMethod" type="u" access="read" tp:type="MM_MODEM_IP_METHOD"> - <tp:docstring> - The IP configuration method. - </tp:docstring> - </property> - - <!-- This ought to be of tp:type="MM_MODEM_STATE" but there are a couple - more wrinkles to be sorted out before we can export that here. - Also, Enabled should be folded into this. --> - <property name="State" type="u" access="read"> - <tp:docstring> - State of the modem. - </tp:docstring> - </property> - - <tp:enum name="MM_MODEM_TYPE" type="u"> - <tp:enumvalue suffix="GSM" value="1"> - <tp:docstring> - A GSM device. - </tp:docstring> - </tp:enumvalue> - <tp:enumvalue suffix="CDMA" value="2"> - <tp:docstring> - A CDMA device. - </tp:docstring> - </tp:enumvalue> - </tp:enum> - - <tp:enum name="MM_MODEM_IP_METHOD" type="u"> - <tp:enumvalue suffix="PPP" value="0"> - <tp:docstring> - Use PPP to get the address. - </tp:docstring> - </tp:enumvalue> - <tp:enumvalue suffix="STATIC" value="1"> - <tp:docstring> - Static configuration, the modem will provide IP information. - </tp:docstring> - </tp:enumvalue> - <tp:enumvalue suffix="DHCP" value="2"> - <tp:docstring> - Use DHCP - </tp:docstring> - </tp:enumvalue> - </tp:enum> - - <tp:enum name="MM_MODEM_STATE_CHANGED_REASON" type="u"> - <tp:enumvalue suffix="UNKNOWN" value="0"> - <tp:docstring> - Reason unknown or not reportable. - </tp:docstring> - </tp:enumvalue> - <tp:enumvalue suffix="USER_REQUESTED" value="1"> - <tp:docstring> - State change was requested by an interface user. - </tp:docstring> - </tp:enumvalue> - <tp:enumvalue suffix="SUSPEND" value="2"> - <tp:docstring> - State change was caused by a system suspend. - </tp:docstring> - </tp:enumvalue> - </tp:enum> - - - </interface> -</node> |