diff options
Diffstat (limited to 'introspection/org.freedesktop.ModemManager.Modem.xml')
-rw-r--r-- | introspection/org.freedesktop.ModemManager.Modem.xml | 245 |
1 files changed, 245 insertions, 0 deletions
diff --git a/introspection/org.freedesktop.ModemManager.Modem.xml b/introspection/org.freedesktop.ModemManager.Modem.xml new file mode 100644 index 0000000..3f6f0bb --- /dev/null +++ b/introspection/org.freedesktop.ModemManager.Modem.xml @@ -0,0 +1,245 @@ +<?xml version="1.0" encoding="UTF-8" ?> + +<node name="/" xmlns:tp="http://telepathy.freedesktop.org/wiki/DbusSpec#extensions-v0"> + + <interface name="org.freedesktop.ModemManager.Modem"> + <method name="Enable"> + <tp:docstring> + Enable the device. Initializes the modem. + </tp:docstring> + <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> + <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_enable"/> + <arg name="enable" type="b" direction="in"> + <tp:docstring> + True to enable the device, False to disable. + </tp:docstring> + </arg> + </method> + + <method name="Connect"> + <tp:docstring> + Dial in. + </tp:docstring> + <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> + <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_connect"/> + <arg name="number" type="s" direction="in"> + <tp:docstring> + The number to use for dialing. + </tp:docstring> + </arg> + </method> + + <method name="Disconnect"> + <tp:docstring> + Disconnect modem. + </tp:docstring> + <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> + <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_disconnect"/> + </method> + + <method name="GetIP4Config"> + <tp:docstring> + Request the IP4 configuration from the device. + Note that it'll only be supported for IPMethod MM_MODEM_IP_METHOD_STATIC. + </tp:docstring> + <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> + <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_get_ip4_config"/> + <arg name="address" type="(uuuu)" direction="out"> + Structure containing IP4 address, DNS1, DNS2, DNS3. + The DNS list is padded with 0's if there's less than 3 DNS servers. + </arg> + </method> + + <method name="GetInfo"> + <tp:docstring> + Get the card information (manufacturer, modem, version). + </tp:docstring> + <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> + <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_get_info"/> + <arg name="info" type="(sss)" direction="out"> + <tp:docstring> + Structure containing manufacturer, model, and version (revision) of the card. + </tp:docstring> + </arg> + </method> + + <method name="Reset"> + <tp:docstring> + Clear non-persistent configuration and state, and return the device to + a newly-powered-on state. This command may power-cycle the device. + </tp:docstring> + <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> + <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_reset"/> + </method> + + <method name="FactoryReset"> + <tp:docstring> + Clear the modem's configuration (including persistent configuration and + state), and return the device to a factory-default state. This command + may or may not power-cycle the device. + </tp:docstring> + <annotation name="org.freedesktop.DBus.GLib.Async" value=""/> + <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_factory_reset"/> + <arg name="code" type="s" direction="in"> + Carrier-supplied code required to reset the modem. Ignored if not required. + </arg> + </method> + + <signal name="StateChanged"> + <tp:docstring> + The modem's state (see the State property) changed. + </tp:docstring> + <arg name="old" type="u"> + <tp:docstring> + Old state. + </tp:docstring> + </arg> + <arg name="new" type="u"> + <tp:docstring> + New state. + </tp:docstring> + </arg> + <arg name="reason" type="u" tp:type="MM_MODEM_STATE_CHANGED_REASON"> + <tp:docstring> + Reason for this state change. + </tp:docstring> + </arg> + </signal> + + <property name="Device" type="s" access="read"> + <tp:docstring> + The modem port to use for IP configuration and traffic. + </tp:docstring> + </property> + + <property name="DeviceIdentifier" type="s" access="read"> + <tp:docstring> + A best-effort device identifier based on various device information like + model name, firmware revision, USB/PCI/PCMCIA IDs, and other properties. + This ID is not guaranteed to be unique and may be shared between + identical devices with the same firmware, but is intended to be + "unique enough" for use as a casual device identifier for various + user experience operations. This is not the device's IMEI or ESN since + those may not be available before unlocking the device via a PIN. + </tp:docstring> + </property> + + <property name="MasterDevice" type="s" access="read"> + <tp:docstring> + The physical modem device reference (ie, USB, PCI, PCMCIA device), which + may be dependent upon the operating system. In Linux for example, this + points to a sysfs path of the usb_device object. + </tp:docstring> + </property> + + <property name="Driver" type="s" access="read"> + <tp:docstring> + The driver handling the device. + </tp:docstring> + </property> + + <property name="Type" type="u" access="read" tp:type="MM_MODEM_TYPE"> + <tp:docstring> + The modem type. + </tp:docstring> + </property> + + <property name="Enabled" type="b" access="read"> + <tp:docstring> + TRUE if the modem is enabled (ie, powered and usable), FALSE if it is disabled. + </tp:docstring> + </property> + + <property name="EquipmentIdentifier" type="s" access="read"> + <tp:docstring> + The identity of the device. This will be the IMEI number for + GSM devices and the hex-format ESN/MEID for CDMA devices. + </tp:docstring> + </property> + + <property name="UnlockRequired" type="s" access="read"> + <tp:docstring> + Empty if the device is usable without an unlock code or has already + been unlocked. If the device needs to be unlocked before becoming usable this + property contains the specific unlock code required. Valid unlock code values + are "" (blank), "sim-pin", "sim-puk", "ph-sim-pin", "ph-fsim-pin", + "ph-fsim-puk", "sim-pin2", "sim-puk2", "ph-net-pin", "ph-net-puk", + "ph-netsub-pin", "ph-netsub-puk", "ph-sp-pin", "ph-sp-puk", "ph-corp-pin", and + "ph-corp-puk". + </tp:docstring> + </property> + + <property name="UnlockRetries" type="u" access="read"> + <tp:docstring> + The number of unlock retries remaining for the unlock code given by the property UnlockRequired, or 999 if + the device does not support reporting unlock retries. + </tp:docstring> + </property> + + <property name="IpMethod" type="u" access="read" tp:type="MM_MODEM_IP_METHOD"> + <tp:docstring> + The IP configuration method. + </tp:docstring> + </property> + + <!-- This ought to be of tp:type="MM_MODEM_STATE" but there are a couple + more wrinkles to be sorted out before we can export that here. + Also, Enabled should be folded into this. --> + <property name="State" type="u" access="read"> + <tp:docstring> + State of the modem. + </tp:docstring> + </property> + + <tp:enum name="MM_MODEM_TYPE" type="u"> + <tp:enumvalue suffix="GSM" value="1"> + <tp:docstring> + A GSM device. + </tp:docstring> + </tp:enumvalue> + <tp:enumvalue suffix="CDMA" value="2"> + <tp:docstring> + A CDMA device. + </tp:docstring> + </tp:enumvalue> + </tp:enum> + + <tp:enum name="MM_MODEM_IP_METHOD" type="u"> + <tp:enumvalue suffix="PPP" value="0"> + <tp:docstring> + Use PPP to get the address. + </tp:docstring> + </tp:enumvalue> + <tp:enumvalue suffix="STATIC" value="1"> + <tp:docstring> + Static configuration, the modem will provide IP information. + </tp:docstring> + </tp:enumvalue> + <tp:enumvalue suffix="DHCP" value="2"> + <tp:docstring> + Use DHCP + </tp:docstring> + </tp:enumvalue> + </tp:enum> + + <tp:enum name="MM_MODEM_STATE_CHANGED_REASON" type="u"> + <tp:enumvalue suffix="UNKNOWN" value="0"> + <tp:docstring> + Reason unknown or not reportable. + </tp:docstring> + </tp:enumvalue> + <tp:enumvalue suffix="USER_REQUESTED" value="1"> + <tp:docstring> + State change was requested by an interface user. + </tp:docstring> + </tp:enumvalue> + <tp:enumvalue suffix="SUSPEND" value="2"> + <tp:docstring> + State change was caused by a system suspend. + </tp:docstring> + </tp:enumvalue> + </tp:enum> + + + </interface> +</node> |